OFFSET THE ELECTRICAL IMPACT OF EXTREME SUMMER TEMPERATURES

By
Posted on Jun 13 2025 in Jay County REMC
Neil Draper
NEIL DRAPER CEO

When outdoor temperatures soar, our electricity use increases. Thats because our air conditioners run longer and more often to counteract sweltering outdoor temperatures. Factor in that we all tend to use electricity at the same times in the morning and early evenings and that equals a lot of strain on our electric grid.

At Jay County REMC, we work closely with Wabash Valley Power Alliance (WVPA), our local generation and transmission (GT) cooperative, in resource and infrastructure planning to ensure you have the power you need whenever you flip a switch. However, the electric grid is much larger than your local co-op and GT.

In summer months, when even more electricity is being used simultaneously across the country, it is possible for electricity demand to exceed supply, especially if a prolonged heat wave occurs. If this happens, which is rare, the grid operator for our region of the country may call on consumers to actively reduce their energy use or initiate rolling power outages to relieve pressure on the grid. Jay County REMC will always keep you informed about situations like this.

We work proactively with our GT to create a resilient portion of the grid and ensure electric reliability in extreme weather, including regular system maintenance, grid modernization efforts, and disaster response planning, but it takes everyone to keep the grid reliable.

Here are a few things you can do to relieve pressure on the grid during times of extreme summer heat:

HELP YOUR COOLING SYSTEM

Select the most comfortable thermostat setting and turn it up several degrees whenever possible. Your cooling system must run longer to compensate for the difference between the thermostat and outdoor temperatures. Seal air leaks around windows and exterior doors with caulk and weatherstripping. Air leaks and drafts force your cooling system to work harder than necessary.

REMEMBER OFF-PEAK HOURS

Run major appliances such as dishwashers, ovens, and dryers during off-peak hours when the demand for electricity is lower. Start the dishwasher before you go to bed.

CONSIDER CEILING FANS

Use ceiling fans to make yourself feel a few degrees cooler.

Remember, ceiling fans cool people, not rooms, so turn them off in unoccupied rooms. During summer months, set ceiling fan blades to rotate counterclockwise, which pushes cool air down for a wind chill effect.

BLOCK OUT SUNLIGHT

Close blinds, curtains, and shades during the hottest part of the day to block unwanted heat gain from sunlight. Consider blackout curtains with thermal backing or reflective lining to block heat and light.

GIVE YOUR OVEN A BREAK

Cook meals using smaller appliances, such as slow cookers, air fryers, and toaster ovens. Studies have shown that air fryers use about half as much electricity as a full-sized oven. Air fryers are smaller and use focused heat, which results in faster cooking times, less heat output, and lower energy use.

As we face the challenges of soaring summer temperatures, understanding the impact on energy demand is crucial for maintaining a reliable power supply. By adopting energy conservation practices during periods of extreme heat, you can save money on your electric bills and contribute to the resilience of the grid, keeping our local community cool and connected.